Denford TRIAC Servo VMC 1PH

Rare Denford TRIAC VMC for Sale. Excellent condition.

Serial No H00675,
Year Oct 2000, 240V,
12Amps, 50Hz,
Single Phase, Control Voltage 24Volts,
Spindle Motor 1.5HP,
1.12kW DC,
Max Speed 4000RPM,
Weight 630kgs,
8 Station Automatic Tool Changer With 3 Tools,
Denford Desktop Tutor Control.

Cabinet glass is with machine. Was removed for cleaning.

https://www.youtube.com/watch?v=54we2GTJL_E

Price £3000 ONO

Machine currently located in Cardiff.

PM if interested.

Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.

Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?

Free bump for a nice machine.

Thanks

Awesome machine, I have a non servo triac

Little on the upper side price wise as it's not been converted

Quote:

---

Originally Posted by Chaz

Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.

Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?

Free bump for a nice machine.

Thanks

---

Hi I believe the set feedrates are 1.6m/min however I would expect the machine can do 2 to 2.5m/min

thanks

Quote:

---

Originally Posted by fidia

Hi I believe the set feedrates are 1.6m/min however I would expect the machine can do 2 to 2.5m/min

thanks

---

Thanks. Mine is running 2000mm/min at the moment. The original servos are higher speed (mine are 8K) whereas my current servos are 3K, so Im OK with this as a speed if it does it consistently and accurately.

My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.

With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.

If you are interested in the machine I would probably sell at a lower price.

Quote:

---

Originally Posted by fidia

My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.

With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.

If you are interested in the machine I would probably sell at a lower price.

---

Thanks. Ive got one but I agree, over £3K pre modernising is a bit pricy.

Id love the machine but already own two denford mills

Quote:

---

Originally Posted by Chaz

Nice machine, virtually identical to mine but with slightly different electronics and placement for some items.

Out of interest (ive changed my motors since and modified to Mach 3 via CS Labs), what is the highest feedrates you can get (X and Y) in mm/min, would you know or be able to check please?

Free bump for a nice machine.

Thanks

---

Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”

Quote:

---

Originally Posted by Tommy

Hi, Do you have “baldor D281 motion control card for a triac P. C. (denford), red 7-segment LED display type. The firmware is ESMINT 3.28 V1.6H/S - JD5.”

---

Are you sure you have asked on the forum enough times?