Denford TRIAC Servo VMC 1PH

[fidia]

My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.

With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.

If you are interested in the machine I would probably sell at a lower price.

[Chaz]

My current stepper triacs are running 2.25m/min in X and Y and 1.5m/min in Z.

With an 80V driver they probably could go a bit faster. I was intent on converting the servo triac however am moving due to work.

If you are interested in the machine I would probably sell at a lower price.

Thanks. Ive got one but I agree, over £3K pre modernising is a bit pricy.

[andy_con]

Id love the machine but already own two denford mills