Coolant Pump

if you want a detailed conversation about a triac then I have plans to add an 10 station atc, it should fit right on without altering the atc setup

(I have some better drawings on my other laptop)

http://i187.photobucket.com/albums/x...pscdvshjal.png

Quote:

---

Originally Posted by andy_con

Essex .

---

Ah, OK, not too far then. Im based in Ickenham, West London.

Quote:

---

Originally Posted by andy_con

if you want a detailed conversation about a triac then I have plans to add an 10 station atc, it should fit right on without altering the atc setup

(I have some better drawings on my other laptop)

http://i187.photobucket.com/albums/x...pscdvshjal.png

---

Certainly, would be interested.

Is it just the wheel that needs to be changed?

no, new drive system and add a stepper motor

Quote:

---

Originally Posted by andy_con

Those are the ones, I can do you a vid over the weekend if you want.

Can't remember what size but they do one thats a perfect fit length wise.

As for power it's plenty of power for me, removes chips out the way nicely

---

Hi mate, any joy with that vid?

Thanks

best I could do sorry, didn't do any machining this weekend

https://youtu.be/3zcjCgwfqWg

Quote:

---

Originally Posted by andy_con

best I could do sorry, didn't do any machining this weekend

https://youtu.be/3zcjCgwfqWg

---

Thanks. Very helpful. You motor is on top whilst mine is in the cavity lower down (the full coolant system) so mine will have to pump a bit higher but not a lot more.

I could try and fix the motor setup I have, could machine a new based for it but probably not worth the effort. Id probably go for the 1/4 HP motor if I can get it to fit without cutting the sheetmetal.

Thanks once again.

I am thinking about replacing the pump on my triac also, I have the large coolant tray like yours Chaz.
I found these coolant pumps made by excel machine tools. You can buy them from brammer.co.uk. The 1/8hp one is £82 and the 1/4hp is £145.

Attachment 17141

Quote:

---

Originally Posted by jamesgates1000

I am thinking about replacing the pump on my triac also, I have the large coolant tray like yours Chaz.
I found these coolant pumps made by excel machine tools. You can buy them from brammer.co.uk. The 1/8hp one is £82 and the 1/4hp is £145.

Attachment 17141

---

Out of interest, have you measured the physical size of our pump to know what size will be a like for like replacement without needing to make holes or cut the motor mount wider?

I haven't but I will put all the dimensions on here when I get my tray back. It had obviously been left with coolant in it for some time before I bought it, all the water had evaporated off and the oil stripped the paint from the bottom of the tank. It is at the local bodyshop being stripped and powder coated.