The mail man drop a package this Tuesday !:angel:
Attachment 24412
Attachment 24413
Printable View
The mail man drop a package this Tuesday !:angel:
Attachment 24412
Attachment 24413
Hi Nick,
You just made me regret not buying a UB1.
Keep up the good work!
Grtz. Bert.
Verstuurd vanaf mijn SM-A320FL met Tapatalk
Sorry Bert,I didn't have this intention!
To much heat at the workshop this time of year,so I am going to start the electronics wirring .
Any diagram to follow?
Wooohooo :DQuote:
Originally Posted by Nickhofen
Nice!
Also good to see progress. I like the motormount, how did you cut it ? :)
About the circuit diagram.. do you want minimal but good or somewhat more elaborate?
Skickat från min SM-G955F via Tapatalk
I was lucky with the motor mount ,I just too advantage of the one end of the heavy duty aluminum beam,it was made like that and I cut it with the grind cutter.
About the diagram I want some thing that will work and not burn any driver or something else,haha
I followed this schematic
https://image.ibb.co/jthYfG/tapatalk_1511816242127.jpg
Its made by a forummember "euricain" I Think..
Then there is this from jazz https://image.ibb.co/bxXMZb/tapatalk_1511818717673.jpg
And I also found lots of inspiration from this. I think it was routercnc that made this one..
https://image.ibb.co/hex2qG/tapatalk_1511815713547.jpg
Skickat från min SM-G955F via Tapatalk
Thanks Robert.
I had the number one and number three schematic,thanks for the second one.
Can I ask why you follow the first schematic?
Yes the last one is mine. Since then I’ve changed the Z drive to DQ860MA to match the others and run off the 68V supply. That allowed me to remove the 30V supply.Quote:
Originally Posted by Nickhofen
As my new Mk4 machine uses 2 Z steppers I’ve added another DQ860MA drive off the same supply so there are 5 drives in total. Otherwise all the safety relays and interlocks are the same. Works well.
I was set on using the schematic from jazz since I started my build.Quote:
Originally Posted by Nickhofen
Then I read the thread about the first I posted and thought it made sense..
The one from routercnc has alot of extra benefits like bleed resistor and ability to change vfd speed manually.
But I still went with the first :D
Skickat från min SM-G955F via Tapatalk