Search:

Hi Malc
The nema flange designation would be the size of the square flange in inches so looking at the ones with gearbox I am guessing from your caliper Nema 34 and I would like a couple of those...

Have you decided on the control software yet? That may impact a lot of what you need to consider to rebuild the machine.

You should have guessed by now that the key to coordinatig spindle speed...

Hi
The lenze board looks to be a 536 ,manuals are online google, the board on the front of the lenze controller is a optoisolator board, and is easy to connect to ,you need a 10v output on your...

I've got 2 of these and both of them have had the Boxford bespoke controller and driver boards removed. The only thing that is re-used on one them is the spindle DC speed controller and PSU etc. This...

This perhaps? https://www.ebay.co.uk/itm/Engraving-Plastic-Sheet-for-hand-engraving-Choose-Size/163742692571?hash=item261fd334db:g:5qwAAOSw3hFdCiTG

John11668 - some BoBs, though not the KK01 that you have, have an onboard PWM - to 0-10V converter, and within UCCNC you'd specify the pin that this function is attached to, and then UCCNC would...

Do you mean the Jog Panel? If so:
There is option to turn off automatic jog panel pop-out, Configuration/Appearance/Disable automatic jogpanel popup checkbox.
If disabled then the jog panel pops...

John,

When I lost my licence file, Artsoft were incredibly helpful and quickly sent me a copy. If you have a fully legal licence and have registered with Artsoft, you should be good.

Rob

Don't confuse the CAMBAM project (.cb) with the GCode. I'm doing this blind and haven't used CAMBAM for a while, so this might be a bit awry, but lets try...

When you define your graphic...

Gcode is nothing but text so you can save it with any extension your email will allow. .txt for example and change it to whatever MACH3 wants on arrival. If it's the file size that's the problem...