Search:

That looks great - very sturdy and neat. Great stuff. G.

Try making the holes 3.1mm and rout them out. ( might even work with 3.01mm). G.

I use alphacam and that uses "join", but I believe the same thing in autocad is "unite". Most other peoples DXF files that I use need to be cleaned up a bit AND JOINED to arrive at complete...

Looks very good Eddy. Geoff.

Omega symbol should be easy enough to draw inCAD. G.

Looks good Eddy. G.

Impressive -thanks for showing. G.

I think that water in the tube could be extremely dangerous, either from the electrical aspect or the risk of the water boiling and developing a high (explosive) pressure in the tube. Please do not...

I don't know much about lasers (have had a 900x600 60W machine for about 3 years now and have never managed to set it up!!!), but if converting a commercial cnc router I would have thought it best to...

That machine is looking very nice. Well done. G.

Surely small flats on the shaft in the grub screw area should stop that. I always thought "two screws were better than one"!!! G.

How about a Bus mans holiday in sunny Lincolnshire Jazz - I could pay for the diesel. G.

m_c is dead right, but it can be a pain if looking for individual rapids to change. If however you wish to slow all your rapids down to feed speeds you could modify the post processor, so that all...

Eddy, that machine looks great, but I would not have expected less from you!!! G.

Hi Mike, wellcome to the forum, good luck with your build, I'm sure that you will get lots of help and advice. G.

Just for information. This morning I took a blunt 1/8" shank 30 degree engraving cutter, ground a new point slightly offset to the centreline - don't know what the the offset was as it was only done...

That does look nice Eddy - well worth posting the photos. G.

Your truck conversion looks great. Well done. G.

Whilst the manufacturer will probably be quite helpful, they would also like to build up a relationship with you in the hope of selling you an upgrade or even a new machine. After the first user,...

Hi Dave, wellcome to the forum. Your hobby and workshop sound very interesting. Once you start playing about with cnc I am sure you will soon be smitten and will wonder how you ever managed without...

Hi, wellcome to the forum. Am I the only person who does not know what a BF 46 is (maybe I am BF!!). Good luck. G.

Your frame is looking great Eddy. Well done, you now seem to be well on your way to having a very nice and well thought out machine. G.

I think that a hiab lorry is the best way as that will work for both loading and unloading. I have a similar problem with a 600kg router to move from Liecester to Bourne, and have been quoted £250...

Hi Dan, wellcome to the forum. I think that your first decision should be to decide what the working area should be, maybe considering media size, ie full sheet, half sheet 1/8th sheet etc. Size...

Hi, I told you in your other post that I have been running a WC spindle for about 10 years and have never bothered connecting up the water supply. I do keep my eye on the spindle body temp (It only...