Search:

Excellent!
I'm sure your enthusiasm will shine through and land you a place, let us know how it goes,
Regards,
Nick

Check out this configuration:


https://www.youtube.com/watch?v=kkcVWIsXGjk

Some nice food for thought in this vid:


https://www.youtube.com/watch?v=OLpTJp6_qmg

Steel is cheaper than aluminium so if you have the skills go steel every time! I would have built a steel router if I hadn't recovered my aluminium from an old magazine printer I paid £30 for all the...

Don't forget DPC and adequate insulation under the concrete, I wish my workshop floor had insulation under the concrete, it wasn't even though of 40 years ago :-(

Well then you would need about 1.5 cubic mts of concrete and two sheets of A142 mesh (merchant size)

Sure, PM me and Ill give you my email address to send the drawings / CAD to.

Ash,

Keeping it simple - to bolt part A to part B with a flush fitting M8 cap head:

1. If you are doing the work:
Part A- scribe centre of hole, use centre punch, spot drill and then drill a...

You having a laugh.!! Drills are about much good at making accurate holes as I am at pole dancing.!! The whole point of Shoulder bolts is precision and this requires reamed holes.

I've not...

Another way to look at this is that if you have access to high-precision machining and manufacturing facilities, you can make parts to incredible accuracy and just assemble. That's how car...

This is getting silly now just use standard cap head bolts like everybody else dose

ok, the precisionist in me is screaming right now because I work with drawings, precision and accuracy on a day to day basis.

Everything has a tolerance, even ground shoulder bolts. A vernier...

Never assume that the machine shop knows what you mean or need. You can however be as descriptive as you want. For example, you add an arrow to the threaded whole with a note leading from it saying:...

The rails have larger than normal clearance holes to allow them to be adjusted as needed. If your rails have 4.5mm holes and they are screwed in from the top, you will need to make M4 tapped holes....

That frame revision looks sweet now Ash.

.Me