Thread: Electrical product advice needed
Hybrid View
-
10-09-2016 #1I think that modern wiring dictates that you have to have the kitchen on a separate ring with RCD (could be wrong though)A certified UK Electrician was surprised to find an IP56 RCD socket under my kitchen sink, he said "We just fit ordinary sockets under sinks"..Clive
The more you know, The better you know, How little you know
-
10-09-2016 #2
Yes, Clive, I am sure you are right for new build or major rewiring. When I had my kitchen refitted, I had to have a new consumer unit with RCDs. Now if a bulb goes ping, it puts the lights out for the whole of that lighting circuit. I think if you look at an RCCB in the wrong tone of voice, it flips (like Her Indoors).

Rob
-
10-09-2016 #3You think that's too expensive? You're not a Model Engineer are you? :D
-
21-09-2016 #4
Just to let you see the quasi end results.
We still need to pursue the external power supply idea, but these are the demo pieces for the craft fair starting tomorrow at the old Truman's Brewery, Brick Lane EC1.
Even before the exhibition starts, we have had a lot of interest in these pieces.
Cheers,
Rob
-
21-09-2016 #5
Very nice Rob good luck at he exhibition
..Clive
The more you know, The better you know, How little you know
-
21-09-2016 #6
Looks great, I'm sure you'll get the specification sorted,
Regards,
NickYou think that's too expensive? You're not a Model Engineer are you? :D
-
26-09-2016 #7
We sold two of them at #LDF16 over the weekend. Now we have pressure to get the power supply right ! Especially as the retail price is near £1,000.
Rob
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Advice needed on everything
By chrisjames in forum General DiscussionReplies: 12Last Post: 11-11-2015, 11:40 PM -
Advice needed on Amadeal
By croy in forum General DiscussionReplies: 13Last Post: 21-08-2015, 01:28 PM -
Quick Advice Needed - F&S
By Tenson in forum Tool & Tooling TechnologyReplies: 1Last Post: 01-01-2013, 06:38 PM -
Electrical whizz needed :)
By don_jarr in forum Motor Drivers & ControllersReplies: 22Last Post: 23-06-2012, 08:10 PM -
SPG X3 CNC Mill, advice needed please
By shaggyhawkings in forum Milling Machines, Builds & ConversionsReplies: 4Last Post: 07-01-2010, 11:00 PM



Reply With Quote


Bookmarks