Quote Originally Posted by Clive S View Post
Tom you are reading too much into all this. It has been done to death many many times on the forum.

Have a look at the quote and notice you are saying primary coil 32 AC the secondary would be the the 32 volt coil.
It is facts like these that can mess people up.

Also you are stating a 1.57 A load is that on the primary or secondary as they would be different.

All this can be very confusing for people seeing the thread title thinking this is the right way to pick a Tx.
yes , sorry corrected to "secondary coil was ~32VAC"

1.57A has nothing to do with transformer, just a picture. VOLT/AMP meter red/blue LCD shows the same voltage as calibrated Fluke - that was my point.
I had only picture with Amp displaying on Fluke which also was calibrating. I know I confused enough but some guys say that my meter might be off.