Threaded View
-
02-08-2017 #12
Last Activity: 15-04-2024
Please read very carefully from my second build log post #33 and from #133 to #140 .
That will answer all your questions. But before that, as was suggested above with a link to a calculator, find what's your screw maximum speed before it starts whipping for given length.
3210 screw is a very serious mass to move and to be snappy opposed to less than 1kg ball nut. Do your calculations, but the way i see it Rotating ball screw nut is the way to go and 400-750W servo motors each side.Last edited by Boyan Silyavski; 02-08-2017 at 10:20 AM.
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Running 4 1605 screws
By kev20009 in forum Lead Screws, Nuts & SupportsReplies: 13Last Post: 22-02-2017, 10:33 PM -
Getting my Arburg c4 up and running
By deadmeat30 in forum Moulding MachinesReplies: 4Last Post: 30-11-2015, 09:54 PM -
TCT Router cutters in a mill running at 4000 RPM
By suesi34e in forum Tool & Tooling TechnologyReplies: 20Last Post: 26-02-2014, 08:02 PM -
Running a three phase router/mill on a generator?
By gavztheouch in forum General ElectronicsReplies: 3Last Post: 19-02-2013, 12:39 PM -
Running costs of CNC machines?
By .kyle in forum General DiscussionReplies: 1Last Post: 19-05-2011, 08:05 PM
Bookmarks