Threaded View
-
13-09-2017 #11
So electronics wise, i have:
4nm Nema 23's
Leadshine AM882 Drivers
DDCSV1.1 Controller
2 x 600Watt 68v PSU's
1 x 23Watt 24v PSU (for the DDCSV1.1)
2.2kw Water Cooled Spindle & Huanyang VFD
Will be using Mechanical Endstops / Microswitches
Had forum member Leadhead pop down today which was great, he had some great tips and recommendations on the build, especially the Nema mounts he suggested which will drastically improve how well they perform (no twisting when stepping).
Got some more bits to sort out but carrying on dry assembling and finding tweaks.
Also gearing up to get this done with the controller:
https://www.youtube.com/watch?v=0ivxcOnEBBM
Thanks
AlexLast edited by AlexDoran; 13-09-2017 at 10:08 PM.
Thread Information
Users Browsing this Thread
There are currently 4 users browsing this thread. (0 members and 4 guests)
Similar Threads
-
The 2.2Kw Chinese Spindles - Info, Setup and Advice + More
By Husky in forum Generic Chinese SpindlesReplies: 222Last Post: 22-01-2021, 06:54 PM -
NEW MEMBER: new member building a cnc router
By steeplejack in forum New Member IntroductionsReplies: 1Last Post: 11-10-2017, 05:07 AM -
Building a plasma table, need advice.
By superclarkey in forum Plasma Table MachinesReplies: 37Last Post: 20-09-2016, 04:57 PM -
NEW MEMBER: Newbie seeking CNC info for guitar building
By rusty999 in forum New Member IntroductionsReplies: 4Last Post: 15-01-2016, 02:26 PM -
Building a hybrid CNC mill. Need advice and recommendations
By oldmam4m80s in forum Milling Machines, Builds & ConversionsReplies: 8Last Post: 16-08-2013, 07:11 AM
Bookmarks