Temperamental spindle

[Clive S]

The vfd settings:
Pd5-400
Pd4-400
Pd3-200.01
Pd6-002.50
Pd7-0.50
Pd8-220
Pd9-015.0
Pd11-01.20
Pd14-0.3
Pd15-1.0
Pd72-400
Pd143-05.0
Pd142-5.0
Pd144-3000

Thanks so much :)

Pd 143 should be set to 2 its hard to believe it ever started with this set to 5
Pd 3 set to 400
Pd 11 I would set to 55 so that the lowest spindle speed would be about 3300
Pd 14 set to 2
Pd 15 set to 2
Pd 7 set to 1.5
Pd 142 set to 7 (if 2.2kw)

Try these and report back

[mark84]

Thank you, Clive. It'll be a few days, but I'll keep you informed.

[mark84]

I've used the router for an hour with no issue, thank you very much for all the replies, especially you, Clive. I'm not quite sure what happened but I'm (fairly!) confident in saying I'm back in business :D couldn't have done it without this forum!

[Clive S]

I've used the router for an hour with no issue, thank you very much for all the replies, especially you, Clive. I'm not quite sure what happened but I'm (fairly!) confident in saying I'm back in business :D couldn't have done it without this forum!

Mark Just for the sake of clarity and for others can you say what was the problem if you know.

Glad you got it going.