Hi,

Some update of the design. I've lower the extrusion side, add an extrusion on the bottom of the x axis, moto mount and the side plates.
As usual if anything seems to be wrong don't hesitate to comment :)
Click image for larger version.  Name: CNC v80.png  Views: 377  Size: 249.2 KB  ID: 23921
The ballscrew of the X axis is now higher to screw it directyl to the bearing plate. Thanks Jazz!
I don't add it but the cable chain will be on top of the 120X40 extrusion.
Click image for larger version.  Name: X axis.png  Views: 335  Size: 14.2 KB  ID: 23923
Click image for larger version.  Name: X Ballscrew.png  Views: 311  Size: 97.8 KB  ID: 23926
The Y axis motor mount plate:
Click image for larger version.  Name: Y axis.png  Views: 320  Size: 87.6 KB  ID: 23924
To mount the ballscrew, I will use a separate plate. I think it will be easier to adjust if necessary.
Click image for larger version.  Name: Y Ballscrew.png  Views: 361  Size: 55.0 KB  ID: 23925

Click image for larger version.  Name: Y ballscrew 2.png  Views: 331  Size: 117.1 KB  ID: 23927


If you see anything, please let me know :) Thanks