Aluminium profile CNC

[BriceO]

Your question about linear bearings - do you mean size? If so 20mm on all axes.

I mean which lead should I take, 20 or 10mm lead? I calculated a max speed of 500 IPM, does it seems to be correct? And do I need to have a ballscrew preload ?

What is the plan on the Y ball screw? It goes straight through the Y and Z axis? With that type of layout some people space the YZ away from the gantry and run the ball screw behind. But this weakens it because of the overhang.
A more popular design is the L shaped gantry with the ballscrew running behind allowing the YZ to be close into the gantry.

I planned to run the ball screw behind the gantry for this axis, but you're right I'll change it for the L shaped gantry.

For the longest axis, which one is the "best" design?
Add a spacer to the ballscrew. The ballscrew runs behind the plate and this plate will be near the bearing blocks. Something like this: