Hello MyCNCUK

**Josh_BCF** · 04-01-2018

Morning guys and girls,

I've been using a CNC Router that our company got from a guy down south who builds them, Had 2 hours training and was left with it, Have been making replica signs and house numbers for a while now (Maybe a year and a half).

I have a few problems and I don't know if I should just include them in this or find the right forum.

**Clive S** · 04-01-2018

Originally Posted by Josh_BCF

Morning guys and girls,

I've been using a CNC Router that our company got from a guy down south who builds them, Had 2 hours training and was left with it, Have been making replica signs and house numbers for a while now (Maybe a year and a half).

I have a few problems and I don't know if I should just include them in this or find the right forum.

Josh Welcome to the forum, just start a new post and ask away give as much info as you can that is relevant to the problem

**Josh_BCF** · 04-01-2018

Thank you - I have posted another topic but I'm still not sure its in the right place - I will need to upload pictures I think - aswhen I google the model number thats on it - I find nothing lol

**Clive S** · 04-01-2018

Originally Posted by Josh_BCF

Thank you - I have posted another topic but I'm still not sure its in the right place - I will need to upload pictures I think - aswhen I google the model number thats on it - I find nothing lol

Josh is does not help if you are using multi names with the same posts.

Post some pics up

**Josh_BCF** · 04-01-2018

I will upload pictures when I finish work - That is where the CNC router is, so its a bit difficult to get help as I only do 16 hrs a week too.

I have all my bits and collets and I can change them and use them - the only thing is my spoil board really - I need to find a decent way to connect it all to my Tee slot bed (I had 3 clamps that would hold the spoil board and the board I was cutting - but it keeps slipping)- I've tried cutting counter holes in the board - but as its the same wood I use to make the signs I produce in work it seems to be a bit fragile and once I connect it and put my cutting board on top - it becomes lose.

my other post: http://www.mycncuk.com/threads/11582-Spoil-Board