Hi From Hereford

[JAZZCNC]

Ok well build one then.!! . . . Some times folks have to learn the hard way.

Hi Francis,

Sorry I fired off here a little quickly here but sometimes folks need bit of "shock n awe" to slap sense into them.!

You are obviously the type to buy on impulse otherwise you wouldn't have bought those plans in the first place. Anyone who had done any decent amount of research would have quickly seen the flaws in those designs.

Cannot stress enough the importance of doing the research which unfortunately means trawling thru threads and lots of reading.
Now sadly many don't want to do this so instead prefer to cut corners like with kits etc. We here on the forum know this recipe for disaster and wasting money.
So WE and I try to steer people away with our advice which has been accumulated while doing our own due diligence and over many years of building and using machines like in my case.
After many years of doing this you get used to people ignoring advise and doing there own thing. Which is perfectly fine that's there choice.
However now and again someone, You, in this case, will catch me on an off day where I just think "Stuff You" learn hard way.
Now You'd think after all this time I'd learn to just think it rather than say it but I've always been FIK got me in loads trouble has a Kid...Lol

So please accept my apology for being so blunt.