Hybrid View
-
30-03-2018 #1
-
30-03-2018 #2
-
The Following User Says Thank You to m_c For This Useful Post:
-
30-03-2018 #3
-
The Following User Says Thank You to Chaz For This Useful Post:
-
30-03-2018 #4
Thank you.
-
01-04-2018 #5
Doesn't using Centroid tie you to using a Windows 10 PC?
You think that's too expensive? You're not a Model Engineer are you? :D
-
01-04-2018 #6
-
01-04-2018 #7
It should be fine if you vet updates before applying them, it's still "Bleeding Edge" for systems you require to have guaranteed up time, if your CNC PC doesn't connect to the Internet and is only used for running the machine there should be no issues at all.
You think that's too expensive? You're not a Model Engineer are you? :D
-
02-04-2018 #8
On a budget
https://www.ebay.co.uk/itm/CNC-4-Axi...EAAOSwQ7hauLAl
No import tax (For EU at least) with MPG wheel or just search ebay for 500khz cnc for direct from china without the wheel. (~£130, take the risk)
You could do a lot worse there's a thread on here about them, many happy users on here and plenty of people to help you get started.
http://www.mycncuk.com/threads/10187...ion-controller
Not sure how import tax works in Algeria it might be cheaper to import from China or EU you have to check this yourself.Last edited by Desertboy; 02-04-2018 at 08:59 AM.
http://www.mycncuk.com/threads/10880...60cm-work-area My first CNC build WIP 120cm*80cm
If you didn't buy it from China the company you bought it from did ;)
Thread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
CSLAB CSMIO/IP-M 4-axis Ethernet Motion Controller
By dudz in forum CS-Lab (CSMIO)Replies: 35Last Post: 02-01-2017, 01:27 AM -
BoB Suggestions within UK
By andy_con in forum General ElectronicsReplies: 9Last Post: 09-05-2016, 10:39 PM -
USB/Ethernet controller for Mach3/4 advice
By paulus.v in forum Control Hardware & SystemsReplies: 17Last Post: 17-02-2015, 09:37 PM -
Boring Bar Suggestions?
By Washout in forum Lathes, Lathe Rebuilding & ConversionsReplies: 10Last Post: 21-06-2014, 08:59 AM -
USB and Ethernet Mach3 motion controller PLCM-E3
By Purelogic R&D in forum Manufacturer NewsReplies: 39Last Post: 29-12-2012, 09:38 AM
Bookmarks