Quote Originally Posted by swarf-boy View Post
So.. after much trolling this and other cnc websites, youtube and all the other stuff you end up looking at whilst researching, I finaly ordered up some AC servos, a VFD and a CS Labs CSMIO IP/A with I/O expansion and MPG module.

Being that this lot cost a fair lump of cash, I want to be VERY carefull in getring the wiring correct.

I get the majority of the connections, but wanted to make sure that all was correct before I started.


I emailed CS labs for help, asking if they could do a quick connection diagram for a servo drive and for VFD ( literature supplied), as none on the diagrams on their web site, fully matched up with the drives I have.
( is it just me, or does an ISO standard for terminal identification not exist yet for drives)

The response was far less than I would have expected, for a company pitching their goods at industrial users.

It was basicly " busy, may be able to help in about 8 weeks".

What!!

A.C. Servo drives are AASD-20A
( CONTROL VIA -10V~+10V)

VFD is a chinese 9100 series 2.2KW
( speed control 0-10V +fwd, rev, stop)

Anyone got experience of wiring these in to an IP/A?
Is the VFD made by a company called ECOGOO ?