Quote Originally Posted by devmonkey View Post
Hi Jazz,

When you say any homing system can do this, the DDCS cannot as you proved yourself, infact no system can unless it is aware there are two motors on a single axis, i.e it has axis slaving, my board allows me to use the DDCS with two motors to square the gantry.
Well I'm not sure how I have proved this my self.? but yes I agree if the system isn't designed to slave motors independently then it can't, but most systems like Mach3 or Linux CNC that use slaved motors independently can which is more what I was meaning. Your system appeared to just be doing what they do, but they don't Auto square the gantry to a set amount, they just move to switches that you set to square the gantry. (actually, I think Linux CNC can now.!).

Anyway good job all the same, I wasn't knocking your efforts just didn't see any auto squaring(offsetting) going on only hitting switches.!