NordicCNC's build log

[NordicCnc]

Regards Motor brake then I can't answer that because I don't know those motors, but servos are not like steppers where they have a shaft sticking out the back, mostly because this is often used for the encoder.

JAZZ, what motors are you using to drive the ball screws and is the Z-axis motor with a brake? The Z-axis for my machine will be quite the same weight.

If you read one of my last posts in the build log http://www.mycncuk.com/threads/13448...823#post114823, I wrote that I will probably use Delta 400W servo motors and with a brake on the Z-axis. Well now I've got an offer for a full return from the supplier of those JMC 180W with integrated drivers, if I swap them for JMC 400W servo motors with integrated drivers. The problem here is that those JMC 400W servo motors does not come with a brake option.