Help Mach3

[dazp1976]

Hi Thanks for that, My steppers are 60BYG301B

Mike

Ah!!!!.
I see 8 wires.
Best balance for both speed/torque is parallel. Also lowers your inductance. Twist pairs together and connect as folliws:

A+ RED & BLU
A- YEL & BLK
B+. WHT & BRN
B- ORG & GRN

Then 10-45v power supply in the other 2 terminals (marked 32v & GND I think).
Try that.


I see your motors are 3.2mh inductance in parallel (it's lowest level avail). Not great for trying to get fast rapids on only 36v or less. Fine for general cutting speeds.