hi many thanks !!
i´ve got the 5k pot working!
the problem was that i was not pressing the run button.
i thought that with the pot did make the start and stop.
sorry if my english is not so good
thanks web goblin

Quote Originally Posted by Web Goblin View Post
You only need an external start/stop controls if you want a remote control of the VFD ie you want your cnc controller to start and stop the VFD. The pot will work without an external start/stop control.
Set Pd072 to what the highest speed of your spindle is or the highest speed you want it to run at is. Mine is set to 400 which is 400HZ and will be around 24000rpm.
PD073 is for the slowest speed setting of the spindle. Again set this to what you think the slowest speed you will use is. I think I left mine at the factory setting.