Quick question, do end mills tend to come in 'standard' lengths? I am still struggling to calculate my Z axis height. I only have 90mm of travel to play with on the KR33 so it's fairly critical.

On a side note, I have fairly drastically reduced the size of the plate which attaches the motor mount to the KR33. The idea being that the motor mount is almost exactly centralised on the two KR33 carriages to reduce canter-levering effects. Good idea?


Dave

Click image for larger version.  Name: Preview11.PNG  Views: 1012  Size: 132.7 KB  ID: 8061