. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 23-07-2016 #1
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 2 Weeks Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,203. Received thanks 278 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Joe,

    I thought this explained it, http://www.mycncuk.com/threads/6565-...5217#post55217
    For the first X rail I used a straight edge to mount it. For the second X rail I used a measurement from the first X rail but in the end I used the Hiwin bearings to line it up.
    By moving the gantry back and forth it was easy to find the position of least resistance and the second X rail was tightened down in that position.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
  2. 23-07-2016 #2
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Last Activity: 1 Day Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 83 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Big welcome back Eddy you have been missed
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote

  3. The Following User Says Thank You to Clive S For This Useful Post:

  4. 25-07-2016 #3
    JAZZCNC's Avatar
    Lives in wakefield, United Kingdom.
    JAZZCNC
    Last Activity: 19-01-2024 Forum Superstar, has done so much to help others, they deserve a medal. Has been a member for 9-10 years. Has a total post count of 8,446. Received thanks 1,445 times, giving thanks to others 109 times.
    Quote Originally Posted by Clive S View Post
    Big welcome back Eddy you have been missed
    I'll second that nice to know you haven't popped your clogs . .
    Reply With Quote Reply With Quote
  5. 05-08-2016 #4
    EddyCurrent's Avatar
    Lives in West Cumbria, United Kingdom.
    EddyCurrent
    Last Activity: 2 Weeks Ago Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 2,203. Received thanks 278 times, giving thanks to others 110 times. Is a beta tester for Machinists Network features.
    Thank you for those kind words.
    Since purchasing CamBam I've been stuck on that forum and got back into writing software in the form of plugins.
    Spelling mistakes are not intentional, I only seem to see them some time after I've posted
    Reply With Quote Reply With Quote
  6. 05-08-2016 #5
    routercnc's Avatar
    Lives in West Midlands, United Kingdom.
    routercnc
    Last Activity: 3 Days Ago Has a total post count of 1,744. Received thanks 413 times, giving thanks to others 76 times. Referred 3 members to the community.
    Welcome back Eddy

    Would be good to have your input in the thread 'finished builds picture menu'

    Thanks
    Building a CNC machine to make a better one since 2010 . . .
    MK1 (1st photo), MK2, MK3, MK4
    Reply With Quote Reply With Quote
  7. 05-08-2016 #6
    Dragonfly's Avatar
    Lives in Sofia, Bulgaria.
    Dragonfly
    Last Activity: 2 Weeks Ago Has a total post count of 20. Received thanks 2 times, giving thanks to others 2 times.
    Quote Originally Posted by EddyCurrent View Post
    Thank you for those kind words.
    Since purchasing CamBam I've been stuck on that forum and got back into writing software in the form of plugins.
    :)
    I can confirm that.
    Just dropped in to see how things are going at mycncuk.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 42 users browsing this thread. (0 members and 42 guests)

Similar Threads

  1. traveling steady, turning 1/2 bar down over 10".
    By graffian in forum Metalwork Discussion
    Replies: 3
    Last Post: 08-05-2013, 07:59 PM
  2. NEW MEMBER: Hello all, finally ready to start a build log.
    By Iwant1 in forum New Member Introductions
    Replies: 11
    Last Post: 25-12-2012, 06:03 PM
  3. eBay: Boxford 125 TCL Mach3 Ready
    By rnr107 in forum Items On eBay UK
    Replies: 1
    Last Post: 25-07-2012, 07:29 AM
  4. Anyone have experience of ready made machines
    By bogstandard in forum Milling Machines, Builds & Conversions
    Replies: 9
    Last Post: 07-04-2010, 07:44 PM
  5. Windows 7 RTM Confirmed & Ready !
    By Lee Roberts in forum Computer Software
    Replies: 8
    Last Post: 29-07-2009, 03:33 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules