. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 03-02-2016 #20
    ba99297's Avatar
    Lives in Thessaloniki, Greece.
    ba99297
    Last Activity: 19-12-2024 Has been a member for 9-10 years. Has a total post count of 141. Received thanks 3 times, giving thanks to others 1 times.
    Boyan thanks for your answer.
    Quote Originally Posted by Boyan Silyavski View Post
    #1
    For me its very simple. Depends on table size. For under 1m everything more than 0.05 anywhere is unacceptable. For bigger tables 0.1 deviation on height is the limit. So hiwin is right.
    I guess when you measure in mm, so when you say 0.05 you mean 0,05mm and when you say 0.1 you mean 0.1mm right?

    So even if i can see light pass between the rail and the straight edge but the 0,02mm filler strip can’t pass through the gap you think is OK for a 1800mm long table?
    Really after epoxy cure, when you attach the straight edge on the epoxy surface is there any gap between the epoxy and the straight edge? The epoxy surface is perfectly flat against the straight edge? If the answer is YES i have an idea here

    http://www.mycncuk.com/threads/9511-...t-work?p=76521

    Vagelis
    Last edited by ba99297; 03-02-2016 at 08:11 PM.
    The creative adult, is the child who survived
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. BUILD LOG: New build.Stell frame cnc 1500X1000.Ball screw and gearing calculations
    By ba99297 in forum DIY Router Build Logs
    Replies: 12
    Last Post: 03-09-2013, 10:37 PM
  2. Adjustable spindle mount?
    By cncJim in forum Marketplace Discussion
    Replies: 2
    Last Post: 19-06-2013, 08:58 PM
  3. Your Opinion
    By PWD in forum Milling Machines, Builds & Conversions
    Replies: 4
    Last Post: 22-05-2012, 11:02 AM
  4. Opinion about the structure of the router ...
    By C.AlveSilva in forum Gantry/Router Machines & Building
    Replies: 11
    Last Post: 01-05-2012, 02:03 PM
  5. WANTED: adjustable tailstock
    By johngoodrich in forum Items Wanted
    Replies: 0
    Last Post: 29-03-2012, 07:38 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules