Let the fun begin !!! ???

[EddyCurrent]

Here's a picture of how mine looks, the bridge rectifier is under those wires between the terminals and the capacitor.


And here's a typical latch circuit

[PAULRO]

thanks guys i'm about to put the first elec dwg. together and when it's finished you might critique it and let me know

[Clive S]

Here's a picture of how mine looks, the bridge rectifier is under those wires between the terminals and the capacitor.

Nice pic. Eddy but I only see one cap!! How big is it ..Clive

[EddyCurrent]

Nice pic. Eddy but I only see one cap!! How big is it ..Clive

22000uF 100v

[PAULRO]

well here is the PSU and e stop circuit . i'm not sure if my calcs. are correct so i could do with a second opinion. i have calculated for 5 motors but i'm only using 4 to get the me up and playing . the 5 motor will be for the A axis further on up the road ( https://www.youtube.com/watch?v=EIwEh6ZmFFs) i have calculated for the lowest cap. and rectifer but will go with something with more head room. any way , feed back would be great , cheers in advance

[Clive S]

Paulro That looks fine to me the rectifiers are usually 30 - 50 A anyway. Not sure I would switch the earth out though. ..Clive

[PAULRO]

yeah , what was i thinking? my record has 1 to many scratches!

[Clive S]

22000uF 100v

Wow that's big for one cap I am using 3 to get 14100uF may I ask where you got it. ..Clive

[EddyCurrent]

Wow that's big for one cap I am using 3 to get 14100uF may I ask where you got it. ..Clive

http://www.rapidonline.com/electroni...apacit-50-4017

[Clive S]

http://www.rapidonline.com/electroni...apacit-50-4017

Thanks that clears that up I also bought mine there code 11-2910 @ £1.85 each x 3 =£5.55 but they are discontinued now . So back to ebay or aliexpress if I need more. ..Clive