Electronics for New Machine + Chinese Spindle + VFD

[Steve-m]

I came up with

A+ black - Green/ white
A-Green - Black/ white
B+Red - Blue / White
B-Blue - Red / White

white being Major colour others tracer

[Clive S]

hi thank you for reply,

here is what im doing http://www.mycncuk.com/threads/11184...18-or-Educam20

here is a link to the only data sheet i can find data sheet, Sorry Lee

http://www.cnczone.com/forums/attach...6/83328.attach

Steve It would be better to move this to your own thread as it is not good practise to monopolise Martins thread. Also the colours you suggested seem ok

[Steve-m]

Thanks Clive I will replace motors

I did start my own thread but alas I didnt get any replies http://www.mycncuk.com/threads/11184...18-or-Educam20

Steve

[Clive S]

Thanks Clive I will replace motors

I did start my own thread but alas I didnt get any replies http://www.mycncuk.com/threads/11184...18-or-Educam20

Steve

Well Steve you did not actually ask a question and did not state what motors you had etc. You have to remember that people have jobs as well and so cannot always answer within a short time frame.

[Steve-m]

Ok point taken sorry,

will replace existing motors on machine now

Thank you