. .

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 28-01-2016 #4
    Clive S's Avatar
    Lives in Marple Stockport, United Kingdom.
    Clive S
    Current Activity: Viewing MYCNCUK Forum Superstar, has done so much to help others, they deserve a medal. Has a total post count of 3,345. Received thanks 618 times, giving thanks to others 83 times. Made a monetary donation to the upkeep of the community. Is a beta tester for Machinists Network features.
    Quote Originally Posted by eurikain View Post
    Hello clive, yes I've soldered an earth wire to the 4th pin. The other end I soldered it on the while directly.

    EDIT: well actually, the other end does not want to stick to the shield...
    That's what I thought you had done you cannot solder to the case. If you re read what I said in the post you linked to. I said change one of the socket fixing bolts to a longer one and solder a ring type connector on the free end of the wire and put the ring over the bolt on the inside and secure it with a nut
    Last edited by Clive S; 28-01-2016 at 10:26 PM.
    ..Clive
    The more you know, The better you know, How little you know
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Chinese 300W DC spindle - is the spindle shaft grounded?
    By HankMcSpank in forum Spindles & Drive Motors
    Replies: 44
    Last Post: 26-11-2016, 07:25 PM
  2. Grounding help, UCCNC, UC300 and connection loss
    By gabi68 in forum CNCdrive (UC100, UC300ETH)
    Replies: 6
    Last Post: 14-10-2015, 07:42 PM
  3. Laser Machine Grounding/Earthing
    By Want2build1 in forum Laser Machines & Building
    Replies: 31
    Last Post: 09-02-2015, 10:18 PM
  4. TB6560 controller Runs spindle on power up When Mach3 plunges spindle stops
    By RoyT in forum Spindles & Drive Motors
    Replies: 5
    Last Post: 29-09-2014, 02:42 PM
  5. CNC Spindle Repair and Spindle Replacement for any Machine of any Manufacturer
    By spindeldoctor in forum Manufacturer News
    Replies: 0
    Last Post: 13-11-2013, 07:50 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules