New start

Quote:

---

Originally Posted by driftspin

Hey Nr1madman,


Congrats on the first cut.

Grtz Bert.

Verstuurd vanaf mijn SM-A320FL met Tapatalk

---

Thanks :D

I hope to say the same to you soon!

Skickat från min SM-G955F via Tapatalk

2amperes is good but how thin are the wires?

Quote:

---

Originally Posted by Nickhofen

2amperes is good but how thin are the wires?

---

It's 0.5mm2 wires. So they should be more than fine. They just feel thin/flimsy.
I'm used to 1.5mm2 wires ;)

Skickat från min SM-G955F via Tapatalk

You are just fine,according to this :
Attachment 24006

Okey.. Had another false e-stop today while surfacing a spoilboard :(
But that is something I can chase, try, tinker with and scream at.

Have another problem, when homing my dual motor axis something have happened.
Uccnc seemed to release the slave axis (has to to square the gantry) when I paired them again I can't home?
And if I restart the computer I can home again but just once?
I can still home z and y how many times I want..

Suggestions? :)

Skickat från min SM-G955F via Tapatalk

Quote:

---

Originally Posted by Nickhofen

You are just fine,according to this :
Attachment 24006

---

So I thought :)

Skickat från min SM-G955F via Tapatalk

Quote:

---

Originally Posted by Nr1madman

when I paired them again I can't home?

---

What do you mean when say "When I paired them again" .? The software should be taking care of the homing seamlessly in the background and you shouldn't have to be doing anything.!

Quote:

---

Originally Posted by JAZZCNC

What do you mean when say "When I paired them again" .? The software should be taking care of the homing seamlessly in the background and you shouldn't have to be doing anything.!

---

Well.. I messed up a "home x" session with an e -stop :D
After that uccnc said slave a axis to x axis but only x motor moved.
So I chose slave none, saved, then slaved a axis again.
Now they work while running programs and jogging but "home x" does not work as it should..

My bad but how do I fix it? ;)

Skickat från min SM-G955F via Tapatalk

Quote:

---

Originally Posted by Nr1madman

My bad but how do I fix it? ;)

---

Ok well if changing the settings isn't working then I'd suggest you re-install UCCNC. Maybe got a corrupted file or plug-in.?

Good morning!

Lovely day today, gonna tidy up some wires and see if I get better results :D

Any feeds and speeds tip for surfacing plywood with a 12mm 4 flute endmill hss.

Not really a suitable tool but the biggest I got right now :)
Have figured out that 1 or 2 flute would be better!

Skickat från min SM-G955F via Tapatalk