Search:

Hi Niko,

Go to " Go Advanced " button, then from that screen you should see the option below Attachments > Manage Attachments.

Sorry about all this, the good news is am now settled in a new...

Hello.
I hope you are all well.
My name is Chris.
I manufacture racing motorcycle parts.
I have been building my own cnc machines for the last 17 years (when time and funds allow).
I would like...

Time to fix it properly . . . well my way anyway



https://youtu.be/6ruQvzAwo4s

F4.03 frequency should correspond to the F4.04 rpm. What you seem to have told the VFD is that at 50Hz output, the motor will be spinning at 9999rpm. That wouldn't work.

I note that F0.04 is the...

Thank you for your kind comments, I did do a bit more while I was distracted from my main project (Fairbanks Morse 15hp Model N )...

Hi everyone,

Some of you will have noticed regular periods where the forum has become completely inaccessible, throwing up database errors like "Unable to connect to database" and/or similar. I...

Cheers m_c,

Quick heads up then: If you’ve experienced any issues accessing the forum lately (especially database connection errors), I’ve posted a full explanation of what’s been going on and...

Due to the recent fleeting nature of the offical Cambam forum, Lee was kind enough to add a dedicated section here for Cambam users.

Cambam official forum: https://cambamcnc.com/forum//
Link to...

This thread had over 100k views, and considering that, amazingly few comments, so it is sort of a monologue, but because of the fairly high interest, I will continue.

The recent updates of my...

Another little project:

32357
32358
32359

4 Twist Umbilic Torus. What's cool is it only has one face.

First project with openSCAD programming to generate the shape, which also allows all...

OK, I finally found a well priced and well featured plasma cutter. Here we go again on another CNC project!

https://youtu.be/GClBEL8X6mc

On this VFD you can't have both DC braking and braking resistor, as they are different mechanisms and you can only enable one or the other.

That "braking starting speed" threshold is only for DC...

Yeah, just a bit of a experiment really. £130 for a 10W 450nm Laser Tree 80 24V from their AliExpress store.

Made the first couple of cuts tonight - was a bit of a bitch to setup and I'm not...

Sorted out today with two bolts down the threaded holes :sneakiness:

The sensors I've got substantially cheaper from a friend who has no need for them anymore but are new, buying brand new each sensor itself is £140...

Thanks!

The X and Y axes have a thin layer of epoxy bedding that was cast against a flat surface (1" glass plate) to try and make them co-planar.

To put you out of your misery - the pillar...

After hand coding some gcode operations recently I wondered if it was possible to create a GUI and create them interactively. Since I have Excel on my machine and have written various bits of code...

Thanks again everyone for helping me make my build come true!
My first engraving is a message for all the people who think that the machine that they have started or thinking to build won't finish...

The first project I did after rebuild thanks to all the people who gave me advice and diagrams. Machine works brill.

30925

Cheers
Dave

Steve P who has commented on one of my end grain inlay chopping board videos on Youtube was asking for some info on my settings. He's on this forum so I said I'd post my workflow on here as opposed...

Sorry Clive I misread your post (long day!) but actually it says the same thing!
1 point each !

Finished (albeit a bit of fettling). Waiting for a optilaser to clear cutoms, need to re cut the rear panel for power connectors, need to decide if I am going to use the AXBB-E to power spindle, need...

3018930190[/[=]3019130192
Been trying a bit of stone with me chinky cnc

There have been lots of people looking for information on the popular (cheap!) XSY-AT1 VFD invertor, so I thought I would group as much information together as possible.
29781

I have configured...

There generally isn't that much difference between an axis servo motor, and a spindle servo motor. The main difference is in how they're utilised.

A servo motor rated speed/torque is what it...