Search:

No worries!

Glad it worked :)

Hi,

It sounds like you may have messed up the acceleration settings for your Y axis (too high) - Make a note of what you have now and compare the acceleration values to the other axes.

My 2p,...

I capped all the open ends on the base and welded in a few more blind bushes where I expected to need to fix something, then keyed up the tops of the rails with some coarse paper on the sander before...

I set one of the linear rails sraight and parallel using the glass plate as a reference and marked for the securing screws.

https://www.misterg.org.uk/photo/images/2022/11/23/IMG_0010.md.jpg
...

The ganty was fabricated out of 100 x 50 x 3 hollow section steel. Thinner than I wanted, but I thought it might be OK if I welded on some thicker pads where the linear rails would fit, and possibly...

I'm not sure if this should be in mills or routers, but here's some construction detail of a machine that I've made:

https://www.misterg.org.uk/photo/images/2022/11/07/Router-iso.md.png

It's...

Thanks!

The X and Y axes have a thin layer of epoxy bedding that was cast against a flat surface (1" glass plate) to try and make them co-planar.

To put you out of your misery - the pillar...