Search:

ta!

So nothing exciting, bit of a wash rinse repeat but in mirror image:

https://i.imgur.com/mv3Jj2B.jpg

https://i.imgur.com/nYbjzlX.jpg

https://i.imgur.com/BOIJcgC.jpg

Some of the links I used a while back are now dead but at the time I found some cross reference charts and worked out that for light duty use Lithiun EP1 and heavy duty use Lithium EP2
this is the...

Nice Mr Current!! What kind of grease are you using for those bearings?

Don't now how well known Neil but your correct it's not documented in the manual and yes there are several of other useful additions which by the nature of External controllers have to be taken over...

I've put off assembling the gantry parts for now and moved on to making the bed rail supports. Here is the basic bed structure and the parts I'm making now are the large RHS sections on top of the...

Rail Types


There are basically three type – Round Rail, Supported Round Rail and Profile Rail.


Round rail with closed bearings has pretty tight tolerance (little bearing play) but since the...

Over complicated derek with not enough support for the bed. The spacing of the cross beams is too far apart and I would make them full width and support from under side.

Less is more.? Go bigger...