Search:

Hi All.

I have some Intel Atom based ITX motherboards for sale.

As these boards are Intel Atom they are not rocket ships, will happily run Windows XP or Windows 7 with extra RAM.

The boards...

Hellfire: I also own a Denford Mirac, but mine does not have the ATC. :blue:

Does your Mirac use the newer control board or the older LCB3?
Mine uses the LCB3, and I am using a Ethernet...

Have you tried using Rhinoceros?
I know JazzCNC (Dean) uses it, and I am sure he will post in due time.

I am looking forward to see a download link, so that I can see if this will work with Mach3.

I run Windows 7 Home Premium x64 on my cnc computer, but I am not using the printer port, I am using ethernet smoothstepper.

As above it does not matter if the hardware is 32bit or 64bit, Only if...

I am down on the Isle Of Wight, and I am more then happy to travel up, and help with what ever I can.

New transformer has been fitted but not yet tested, and I also found that C6 (.47J100) {470nF 100V Polyester Capacitor} has also failed, so that will need to be replaced.

I also don't trust the...

If you are on about the big black unit bolted to the end plate, that is a VHF 28-08io5
Half Controlled Single Phase Rectifier Bridge, and the small transformer go's nowhere near it.

The two...

You will need to purchase a Mach3 license: http://www.machsupport.com/purchase.php

From the control box picture the top right are the main stepper motor drives, they look something like the 542 or 752.

If so then it looks like only the step and direction are connected, and the...