Quote Originally Posted by A_Camera View Post
Hi,

Here is a simple circuit which will limit the current during about 1.5s which should be enough.

http://electronics-diy.com/soft-star...wer-supply.php

Even the one from Conrad which you linked will work, but it is limiting between 0.4-1s only. The circuit needed is pretty simple, but of course, if it is a commercial product then it has a price. Never the less, well worth investing in it. I have one built in my PSU, but an external one works just as well.
If you put in a DPCO relay you could use it to drop in a bleed resistor when the power is removed, after all this is what this thread started out as