. .

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Quote Originally Posted by driftspin View Post
    Uh.. no, no windows 10...
    Not yet that is...
    I dont like the extra layer off user interface windows 10 has. Afraid i cant avoid it in the long run though.

    .

    Fusion360 is on a desktop machine with a discrete vga card (I5 2500k 8gb ssd+ 4gb1050ti) which is working ok for me for now.

    I have not made any designs yet that need better hardware.

    I have a windows 7 x64 laptop to run uccnc for now
    It is a HP 2nd gen i5 with 8gb memory 1tb sshd.

    I want to network them but found uc300eth does not like being networked through a switch to my Fritzbox router for some reason.

    I need to do some wiresharking to find out what is going on.
    Every time i start uccnc the connection drops.

    When i have a direct connection (not on a switch) everything is working great.

    Maybe i should not network it and just have it direct connect to the laptop.

    The laptop is multifunctional device for now. homework for kids diagnostic tool for my car and so on.

    I am moving the kids to their own hardware... trying to claim the laptop for mancave purposes only.

    Maybe ill have the laptop wifi connect to the desktop and uc300eth by wired port.


    Grtz Bert.

    Verstuurd vanaf mijn SM-A320FL met Tapatalk
    I am using laptops in my home LAN and the UC300ETH is connected through a LAN switch and that works fine. W10 is no problem. Have it on all my computers.
    Last edited by A_Camera; 09-09-2018 at 02:07 PM.

  2. #2
    Quote Originally Posted by A_Camera View Post
    I am using laptops in my home LAN and the UC300ETH is connected through a LAN switch and that works fine. W10 is no problem. Have it on all my computers.
    Ok that is good to know.

    When i find out what in my network is making the uc300eth or laptop disconnect UCCNC i will report back on that.


    Grtz Bert.



    Verstuurd vanaf mijn SM-A320FL met Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. My UCCNC probing screen and macros
    By A_Camera in forum CNCdrive (UCCNC)
    Replies: 6
    Last Post: 13-01-2019, 04:19 PM
  2. UCCNC MyProbe error
    By chipxx in forum CNCdrive (UCCNC)
    Replies: 0
    Last Post: 22-08-2017, 02:36 PM
  3. UCCNC Software Info Request
    By Roadrunner in forum CNCdrive (UCCNC)
    Replies: 1
    Last Post: 31-08-2016, 12:10 PM
  4. UCCNC and Rodocutter X4 Problems
    By RusticRusty in forum Gantry/Router Machines & Building
    Replies: 9
    Last Post: 06-06-2015, 09:01 PM
  5. At last, found the bug
    By Robin Hewitt in forum Stepper & Servo Motors
    Replies: 0
    Last Post: 20-12-2008, 07:14 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •