Thread: Newbie PSU calculations
Threaded View
-
23-05-2021 #16
Last Activity: 19-01-2024
MCB's cost like £5 each and glass fuses like 50p so it's crazy not to use them IMO.
In my control boxes, I fit 3 x MCB's one for the Main toroidal PSU, VFD, and low voltage PSU's, the drives each have their own slow-blow glass fuse. So For less than £20 we are protecting over £400 to £500 worth of electronics and in worst-case scenario's, which happen more often than people realize property and life which are quite honestly priceless.!! . . . .Don't be stupid people, fit fuses and be safe.-use common sense, if you lack it, there is no software to help that.
Email: [email protected]
Web site: www.jazzcnc.co.uk
-
The Following User Says Thank You to JAZZCNC For This Useful Post:
Reply With QuoteThread Information
Users Browsing this Thread
There are currently 1 users browsing this thread. (0 members and 1 guests)
Similar Threads
-
Ballscrew design and 12vdc rpm and torque calculations help required
By rjsutton in forum Machine DiscussionReplies: 6Last Post: 13-09-2019, 04:03 AM -
Check my power supply calculations?
By Nealieboyee in forum Machine DiscussionReplies: 9Last Post: 04-12-2018, 08:27 PM -
Lathe spindle dividing - resolution calculations and help!
By craynerd in forum General DiscussionReplies: 3Last Post: 18-06-2018, 01:23 AM -
Y and Z axis set up.....calculations
By dudz in forum Gantry/Router Machines & BuildingReplies: 7Last Post: 31-01-2014, 01:54 PM
Bookmarks