Geckodrives vs others

[John S]

Well i have 12 dead gecko's is anyone wants to peer inside.

[irving2008]

If you dont plan to get them fixed by Gecko, I'd like to have a look and see if they're fixable.

[Ali Kat]

I have killed two Gecko's to date and was able to fix one but not the other. It was a fairly simple change out of the main chip if I recall and it would have had to have been easy as I am definitely NOT an electronics type of person - arc welding is about as close as I normally get to electrickery.

With my 50% success rate I also have a good home for any dead geckos that are no longer wanted by their owners.

Nick

[andy0202]

Well i have 12 dead gecko's is anyone wants to peer inside.

I too would be interested in taking a look at any of the broken geckos you have! I have a little experience with electronics so hopefully may have some idea.

[Jonathan]

Well i have 12 dead gecko's is anyone wants to peer inside.

Looks like I'm late in the queue here, but I've fixed a fair few stepper drivers and made some before now so if you want me to have a go I will. Which geckos are they?

[JAZZCNC]

Nothing much in there that's DIY and to me unless your seriously into electronics and properly kitted up you've no chance of DIY repairing.? . . . These things are tiny!

The only thing that looks like it can be swapped is the chip in the right lower corner, if you can buy one anywhere other than gecko.? The rest to me just say foooooook off don't even think about it.!!!

[Jonathan]

unless your seriously into electronics
[...]
The rest to me just say foooooook off don't even think about it.!!!

Coward
I'd consider all of that easy enough to solder by hand except for the one TQFP IC which is a bit fiddly and isn't likely to break in any case, but then I guess I fall within the seriously into category...

[JAZZCNC]

Coward

Yep and when it comes to that level of soldiering then I ain't afraid to admit it.!! . . . I know my limitations.

[Jonathan]

Yep and when it comes to that level of soldiering

You wont find me doing much soldiering

[JAZZCNC]

You wont find me doing much soldiering

Ha ha just spotted what you mean. . . . . . School was one of my limitations has well.?? . . . Much preferred my head in an engine than in a book or down a mine. .
( Kids.!! This wasn't big or clever just the way shit was back then.!! )