BOB & Stepper Drive

[irving2008]

Hi Jim, Just take the negs (-) to any Gnd's on the Opto V3 you won't need any Resistors the drives will work fine.

Dean.

I'll bow to your better experience on this BOB Dean, the manual is useless on what type of outputs they are.

[GTJim]

Thanks for all your advise.
Many more to come. Lol
Jim

[irving2008]

OT, many many moons ago I used to have an identical colour Clubman 1275GT, bored out 1340cc, blueprinted, 731 cam and twin downdraft webers with a small bonnet scoop. Was fun on and off the track!

[GTJim]

OT, many many moons ago I used to have an identical colour Clubman 1275GT, bored out 1340cc, blueprinted, 731 cam and twin downdraft webers with a small bonnet scoop. Was fun on and off the track!

Irving, this is a fully lightened and balanced 1380 with 286 scatter cam and all the frills. Was my pride and joy as it handled fantastic, but it had to go.

[JAZZCNC]

I'll bow to your better experience on this BOB Dean, the manual is useless on what type of outputs they are.

Sorry Irving wasn't meaning you were wrong just rushed reply and should have Said I've used several of these BOBs so know won't need Resistors on these drives. .