Thor, or should that be Zeus?

[Lee Roberts]

And this works exactly as the idea I came up with for Thor. I need to look at implementation and the ease of moving the 4th axis off (and remounting accurately).

Yea I was going to suggest the RapidTurn unit to you as I also follow Cliffs channel, I would imagine your best bet would be to use some real hard stops you can then "bump" into for locating, as you say implementation on Thor is tricky because you dont want those fixtures to get in the way for other jobs.

Thanks for taking the time to take and share the macro shots, its nice to see exactly what the finish is like from different machines.

[Desertboy]

Having now seen Thor in real life I can tell you the pictures do not do it justice and then she moves and when she moves the earth moves with her lol.

A true work of art

[Chaz]

Yea I was going to suggest the RapidTurn unit to you as I also follow Cliffs channel, I would imagine your best bet would be to use some real hard stops you can then "bump" into for locating, as you say implementation on Thor is tricky because you dont want those fixtures to get in the way for other jobs.

Thanks for taking the time to take and share the macro shots, its nice to see exactly what the finish is like from different machines.

No problem, Ill do more of it as I do more machining and work out the good / bad / ugly of the machine's ability.

The macro shot makes the part look fairly horrible however in reality, its not. Its 'as it comes' and can easily be polished up.

[Chaz]

Does anyone know what NT30 spindle this guy might be referring to?

http://www.cnczone.com/forums/uncate...uminium-4.html

Impressive little machine ....

[Desertboy]

Does anyone know what NT30 spindle this guy might be referring to?

http://www.cnczone.com/forums/uncate...uminium-4.html

Impressive little machine ....

That guy has his shit together ;)

This bit I found interesting and I never considered but makes a lot of sense makes no difference to your machine though lol.

"When you go with Chinese ballscrews, I think it is better to go with 5mm pitch, at least in my case as I dont need very fast rapids, due to force of the ball on screw. 10mm pitch screws will produce twice as much force on the wall of screw, and I wouldnt be surprised to see backlash even faster on 10mm pitch screws."

[Chaz]

Some update pics of Thor. Need to finish the enclosure and 4th axis / lathe setup.

[Chaz]

Does anyone know how to deal with dual probes, on NC and one NO, going into the same probe input?

Can I run two probe inputs?

This is the issue, how else to wire this (goes into CS Labs) input 3.

[Desertboy]

Does anyone know how to deal with dual probes, on NC and one NO, going into the same probe input?

Can I run two probe inputs?

This is the issue, how else to wire this (goes into CS Labs) input 3.

you could use a relay on one output to get both of them to NO or NC

[Neale]

I've been thinking about exactly this problem for my own machine (also using CSMIO). I haven't built the touch probe yet but I was intending to use a simple bit of circuitry to invert one of the signals and then combine them. I'm not sure that you can solve the problem without adding something outside the CSMIO as it only has one input that is suitable for the job.