View Full Version : Items Wanted
- WANTED: Suppliers of small quantities of BSW screws etc..
- WANTED: Energy chain
- WANTED: Timing Pulley Suppliers?
- WANTED: UNC grub screw supplier?
- WANTED: WANTED 2 Steppers
- WANTED: CNCbrain wanted
- WANTED: WANTED: HIWIN LG25 rail
- WANTED: Looking for cable braid
- WANTED: Aliminium profile supplies
- WANTED: SIEG C3 Mini Lathe WANTED
- WANTED: Looking For...
- WANTED: Automatic toolpost wanted for Harison M250 cnc
- WANTED: Anyone got any brochures on old cnc machines?
- WANTED: Need electronics, anyone upgrading??
- WANTED: Bridgeport x and y bearing brackets
- WANTED: SIEG C3 Mini Lathe
- WANTED: Ballscrew and antibacklash nut for Z axis
- WANTED: Metric feed nuts for bridgeport
- WANTED: 12mm ball screw & nut
- WANTED: Wanted: Somone to mill some parts for me
- WANTED: 11" Harrison
- WANTED: Wanted: Nema 23 motor mount
- WANTED: Nema 23 motor mount
- WANTED: Where can I get some 8 - 10mm linear bearings - rail
- WANTED: Looking for used mills ?
- WANTED: Router Wanted
- WANTED: Small CNC Drill/Mill
- WANTED: Ali Extrusion anyone?
- WANTED: Wanted taps & die
- WANTED: Boxford Imperial Lead screw + Half nut
- WANTED: Needed for my build
- WANTED: Broken lathe??
- WANTED: Hardinge hlv-h or Feeler 618
- WANTED: 8mm x 8mm (ID) motor couplers
- WANTED: Boxford 125TCL Tool holder?
- WANTED: small(ish) manual milling machine
- WANTED: Wanted: Small Metal Work Milling Machine
- WANTED: looking for 6061 T6 Aluminium angle
- WANTED: 8mm Reamer
- WANTED: Tool holders for T2 (I think) quick change toolpost
- WANTED: wanted drive belt and pulleys
- WANTED: 4 x 8 cnc router wanted and multi borer machine
- WANTED: Wanted: Spindle
- WANTED: Power Supply wanted
- WANTED: Spindle holder for 1.5kw Chinese spindle.
- WANTED: Taking the plunge again!!!
- WANTED: Profile rails, 600mm and 900mm
- WANTED: CNC Bench Lathe wanted
- WANTED: Conect Minor or Major CNC Milling Machine Wanted
- WANTED: PC for my new cnc machine
- WANTED: Roller end caps from pvc or nylon Help!
- WANTED: Ice ball mold price question...
- WANTED: RM1605 Ballnut Tubes ( keep the bearings in place during fitting and transport)
- WANTED: Looking for a 8'x4' cnc machine
- WANTED: Boxford 190VMC toolholders, tool changer and manuals
- WANTED: 4amp (ish) Driver wanted
- WANTED: 2 x 20/16mm supported round rail
- WANTED: ER20/25 straight shank collet chucks
- WANTED: Looking for a used axyz 4000 series cnc router
- WANTED: Frame work
- WANTED: Wanted cnc router!!
- WANTED: Spai Genio software
- WANTED: Ballscrew and nut
- WANTED: Wanted - small bench cnc mill
- WANTED: OLD LATHE wanted..WORKING OR NOT
- WANTED: Wanted Denford Triac CNC Mill
- WANTED: Small Milling machine
- WANTED: Anyone got a TB6560AHQ IC?
- WANTED: 5" / 125mm Lathe chuck
- WANTED: Walter Helitronic Power 500,600 CNC required
- WANTED: Routout CNC Driver Board 2.5 amp Single
- WANTED: Denford Triac
- WANTED: Bridgeport style miller wanted/ Boxford VM30 miller part ex or sale.
- WANTED: adjustable tailstock
- WANTED: Denford EasyTurn Wanted - Boxford 125TCL & AUD Part ex.
- WANTED: Boxford design tool Software V10
- WANTED: WANTED Nakamura-tome TMC-20 manuals
- WANTED: 4" / 100mm lathe chuck
- WANTED: Router Spindle Motor
- WANTED: Steel Off-cut!
- WANTED: GCc Laser Pro or Epilog Laser Cutter Machine
- WANTED: 12 x 2 mm acme (trapezoidal) tap
- WANTED: Steinel SV1 Collets
- WANTED: Anyone have one of the ebay special 50V 500W Minebea PSU's still?
- WANTED: Denford Triac / Easimill
- WANTED: denford nova/star mill - emco f1/ pc50 - boxford vmc or similar wanted
- WANTED: 10mm think square of aluminium?
- WANTED: Bit OT - 15mm od seamless tube?
- WANTED: spindle
- WANTED: CNC mill - WHY?
- WANTED: CNC Mill/Router for Cutting Aluminium
- WANTED: Centec 2A manual
- WANTED: Denford Triac with automatic tool changer
- WANTED: Basic 3 Axis CNC breakout board.
- WANTED: Tb6560ahq ic
- WANTED: Cnc router wanted
- WANTED: 4 jaw chuck Boxford - Axminster etc
- WANTED: 3-Axis Mill recommendations
- WANTED: Mig gas bottle.
- WANTED: Wanted: Cnc router at least 1200 x 1200 bed size
- WANTED: collet chuck
- WANTED: Small amount of Profile Section wanted plz
- WANTED: 3mm Ball nose bit please
- WANTED: CNC machine wanted
- WANTED: BP Series1 CNC Maintenance manual
- WANTED: Someone to vacuum form and trim a couple simple parts
- WANTED: stepper driver module
- WANTED: Wanted Linear Scale/Encoder
- WANTED: has any one got a MIG welder for sale
- WANTED: Boxford 125TCL Chuck Wanted
- WANTED: Chinese 1.5kw spindle/vfd
- WANTED: Has anyone got a Cnc for sale or a cnc 3020 or Cnc 3040 for sale
- WANTED: motors and more for my first cnc router.
- WANTED: Equipment
- WANTED: Need a tiny bit of work done on lathe
- WANTED: 80mm lathe chuck, 3 or 4 jaw
- WANTED: Wanted cnc lathe
- WANTED: 70v PSU
- WANTED: Wanted, PCB's from a Boxford 125TCL
- WANTED: Head Tram Square
- WANTED: 4ft x 4ft CNC Router
- WANTED: 1/8" or 3mm Single flute carbide cutters
- WANTED: stepper motor with dual shaft (6mm dia) wanted
- WANTED: SFU1610 Ballnut
- WANTED: home built cnc
- WANTED: Off-cut required.
- WANTED: EPS Block
- WANTED: TG 100 Collets in various sizes
- WANTED: 2.2 KW Chinese Spindle
- WANTED: 3 nema 23's 76-81 or 86mm long, 8 wire - shaft each end - turn wheels, if 8mm out...
- WANTED: xp pro computer, with mach3 license and maybe vectric on it with license
- WANTED: Supported rail. The bigger the better
- WANTED: X3 CNC milling machine
- WANTED: Milling machine head
- WANTED: Metal Lathe Wanted Cheshire/Manchester/Liverpool area.
- WANTED: Metal Lathe Cheshire/Manchester/Liverpool Area
- WANTED: Drill press
- WANTED: 10 x 5 CNC Router
- WANTED: Van ply lining programs
- WANTED: FOUND: RM1605 ballscrew, at least 365mm (ish)
- WANTED: Wanted - a 1/4" (6.35mm) ER11 collet.
- WANTED: Electrical Box for inverter
- WANTED: EMCO Lathe Tool Changer
- WANTED: Hobby CNC Mill
- WANTED: FK12 fixed ballscrew support
- WANTED: 3 axis cnc wanted bridgeport size
- WANTED: 22mm or 7/8" (approx) drill
- WANTED: Wanted CNC Router
- WANTED: Engraving Machine to engrave around 0.3mm depth, DXF files on aluminium, anyone?
- WANTED: 100mmx100mm 6mm aluminium plate/sheet.
- WANTED: 10mm Bosch Rexroth Drilling Jig wanted
- WANTED: Ball nut brackets for16mm ballscrews
- WANTED: Ballnut Bracket needed please
- WANTED: 3 bits of 250 by 1220 by 40mm t-slot, 1220 16X5 threaded rod and isel ballscrew, plus
- WANTED: BK12 Bearing Block Wanted - 1 off
- WANTED: wanted 250mm by ? 40mm thick isel t slot - 3 bits ? length and a 16 by 5 ballscerw
- WANTED: Small milling head
- WANTED: parker CD20 stepper drive
- WANTED: 2 x 20mm Fully Supported Round Rail
- WANTED: cnc milling machine
- WANTED: bolt on rail and block bearings or what ever - what have you
- WANTED: Looking for a MKII Boxford duet for conversion to Mach 3
- WANTED: Isel router wanted
- WANTED: Boxford Threading Dial
- WANTED: 150mm dia x 15mm wall Ali pipe
- WANTED: emco compact 8 or denford orac tail stock wanted
- WANTED: TB6560 + PSU, Drivers, BOB's, Nema 23 Kits DEAD or ALIVE
- WANTED: Wanted Isel c142-4 controller
- WANTED: Ballnut brakets
- WANTED: Wanted small cnc router
- WANTED: Mist lubrication system
- WANTED: QC 30 holders or Erickson or Kennemetal NMTB 30 holders.
- WANTED: easy change collet chuck
- WANTED: After some nylon sheet please or offcuts.
- WANTED: Small pice of ali plate 80mm x 80mm x 17-20 mm
- WANTED: wanted CNC Mill.
- WANTED: 2 nema 23's 76mm long dual shafts 6.35mm plus one 56mm long nema 23 dual shafgt 6.35
- WANTED: Live-in workshop in London
- WANTED: no longer required
- WANTED: HIWIN legacy blocks/carriages - LGH20 or LGW20 – LGR20C Electrolysis
- WANTED: Wanted Powermill to mach3 post
- WANTED: Hiwin 15 plastic ball retainer
- Wanted - Cnc router
- WANTED: Wanted: Boxford 160 TCL CNC Turning Machine Tool Installation & User Manual
- WANTED: Wanted: denford mill + boxford tcl lathe
- WANTED: Boxford TCL 160 front panel
- WANTED: milling table
- WANTED: Small metal airsoft part
- WANTED: (Now found) 2 Inductive sensors
- WANTED: boxford 260vmc
- WANTED: cnc plasma table or in parts
- WANTED: tibken taper bearing
- WANTED: 4 core CY cable... midlands
- WANTED: BT 35 Tool Holders
- WANTED: High voltage stepper drives
- WANTED: Table top CNC lathe wanted.
- WANTED: Gerber cnc router
- WANTED: Wanted, Roland MDX 40 or similar
- WANTED: Wanted CNC Router
- WANTED: looking to buy
- WANTED: SBR 16 or 20 supported rails
- WANTED: part number
- WANTED: Bridgeport table wanted
- WANTED: Wanted Colchester/Tom Senior parts
- WANTED: Wanted small cnc lathe
- WANTED: One off (smallish) piece of SFU1204 & ballnut
- WANTED: Boxford 160 tcl bench top cnc lathe
- WANTED: 75mm or longer Flexible Brush strip.
- WANTED: Proxxon MF70
- WANTED: Wanted: Proxxon MF70 Desktop Milling Machine or Similar
- WANTED: Looking for tailstock backplate
- WANTED: CNC Milling Machine
- WANTED: EMCO 5 CNC original parts wanted
- WANTED: cnc capable milling machine
- WANTED: wanted spindle speed increaser for cnc milling machine
- WANTED: Testing the water, Gerber System 48 or variant
- WANTED: Fanuc Triac Levelling pad and buttons
- WANTED: 4th Axis (A axis)
- WANTED: 3-4 AXIS CNC Milling machine wanted
- WANTED: WANTED - Deford Triac ATC In/Out cylinder
- Proto trak mx3 DNC kit
- WANTED: 20mm rail
- WANTED: Dahlgren dsc2000 black box to drive Gryphon suregrave router
- WANTED: WANTED: CNC Benchtop Machine
- WANTED: Roland MDX-40 or 40A or SRM-20
- WANTED: Cheapest Place for Threadmills?
- WANTED: Hiwin rail + carriages
- WANTED: Yaskawa servopack
- WANTED: Boxford or Denford Lathe Auto Tool Changer
- Plasma table 4x4 kit and electronics
- WANTED: wanted small cnc lathe
- WANTED: WTD Eurotherm/SSD drives
- 25mm Round Rail @ 400mm L
- WANTED: SORTED : light-weight rails & screws (ball/trapezoidal)
- WANTED: Looking for quote for a chrome plated piece of steel (details enclosed)
- WANTED: Easy change collets
- WANTED: WANTED - Hardinge 5C Hexagonal Collet 3/4"
- WANTED: CNC MACHINE 1000mm X 600mm
- WANTED: Keyed shafts
- WANTED: Harrison mill Vertical head
- WANTED: Mesa Cards
- WANTED: Denford Orac old electronics
- WANTED: ER20-T2 Collet Spanner
- WANTED: 16mm supported rails
- WANTED: Wanted gecko g540
- WANTED: CNC kit for Aluminum? Supported rails, bearing blocks, screws, spindle-controller
- WANTED: Needing a 1.0MM Leadscrew and Chaser for a Hardinge HCT
- WANTED: WANTED - CNC Milling Machine, complete plug and play solution
- WANTED: Roland/Modela MDX 540 or 650 wanted!!!
- WANTED: Wanted belt drive grinding spindle.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.