Search:

Maybe by mark 4 I'll be this good - v nice


Sent from my iPhone using Tapatalk

I've made a handful of these bridge rectifier PCBs for connecting with toroidal transformers to make PSUs ideal for stepper motors.

20115

20116

They have two 10,000uF 100V capacitors in...

Here is a video overview of what i believe is a correctly build DIY mist fog less cooling system. Hope that helps you and others!



https://youtu.be/NVu4mCFCvmA

Dial bore mic's are expensive and you still have to check them with gauge so in all honesty i don't think its a very good investment unless you pick up something cheap on ebay.
with spring loaded...

Connect one end of the resistor to +24V, not to PSU -ve. What you then have is the BOB input driven from the 24V with the resistor lowering the voltage to the BOB to a nominal 5V. When the proximity...

DXF attached for a square button tag, the font is Arial BTW

19102

A ballnut once assembled should never drop a ball unless a ball return pops out.
If this happens, balls will be all over the floor.
The cheap ballnuts will have plastic ball returns and these are...

Let me be first then :devilish:. Tried to be short but will give some more details so its easier for people to see the main points. I think video is better than pictures if possible.


The Yellow...

Thanks for the share Steve, i'm using 360 myself to.

Dont know if you've seen the NYC CNC youtube channel, he dose a series of videos called Fusion Friday, its a new tutorial video served up every...

If anyone is interested in prediction of cutting forces in aluminum milling I would recommend to read the article:
"A comparison of analytical cutting force models" published by WIAS
There you can...

Guys,

I've stepped in to moderate this as a new thread from the original "Brain farts" thread, as while this discussion could be a worthwhile one to have, it's now off topic for the original...

Looking very nice ad sturdy.:applouse:

This is how I got my beams sorted I welded 15mm plates on each end and then had them machined parallel and to length. I also had two faces of the box...

That's looking good now, coming along nicely! Sad I know....but I do like to see lots of shiny metal with lots of holes drilled in....note to self, must get out more :wink:

Sorry to read about the problems, all part of the fun...I think? Lol

On a positive note, you've got this as the money shot though a:
...

A couple of things to consider with a VM running CAD programs often with high overheads and requiring access to virtual memory page files from HDD,
Virtual machines ares less efficient than actual...

I run 8.1 64bit as a dual boot with XP just dropped in another drive so I could run fusion on my Workshop machine for quick edits, providing you have a machine capable of running it, 7 or 8.1 64bit...

Nice work on the clamps, always handy to have.



These always stick out in my mind:

http://www.mycncuk.com/threads/4420-Hold-down-clamps-what-do-you-use

Some solid blocks from the side may...

Very nice,
Looking forward to seeing this finished.
Mike

Wow!
This looks like a masterbuild!
I love it when its over complicated ;)

Fancy, funny and fantastic!

As Magicniner has said, these VFDs take single-phase in and produce a 3-phase output that is designed to drive a 3-phase motor. Why can't you just use two of the output connections and drive a...

in 2010 screenset on tab "Limits" active "soft limits"

and put off " Automatic override" and " Manual override"



and if is the same problem i have somtimes its ok now.

If you use an external 10k connected to the sensor output, and measure from the other end of the resistor you won't blow the sensor up and you can take that into account in your calculations. I use...

Here are some more pictures from the front.



1740217403174041740517406

I like to use this calculator to calculate the Tangential cutting force, that is how hard the machine is pushing the bit sideways through the material. In my experience you can bet any...

Masonary bits are too blunt. You would also need to spin backwards to aid removal of the tap. I have used special carbide spade drills to remove taps. The only place in the Uk that has them is ...