Search:

Just a thought, I've got enough shielded cable for replacing the external leads to the motors from the 4 pin plugs via the control box, how do I ground this part of the cable or is it shielded via...

Standard clear tubing. The cheapest. No problem after a couple of years. And i really like using Pink liquid, so i see what happens. On my second machine i overdid it and ordered PU tubing from...

3mm will be fine, the switches have no mass really so vibration will not be an issue.

I would read the data sheet and set the current to something reasonable. That is science.

Once the machine is running, adjust it so that the motors run at a temperature that is just about as hot...

I'd set the drives to 4 amps peak?

Wow it looks good!!!!

No you have not. That is the beauty of a forum its generally self correcting I certainly need it.:thumsup: and I value your input.

nice to see it's moving smoothly! did you sort out your screw binding issue?

looks great so far to me! Quick progress too!

Nickhofen - honest question here, so please don't take it the wrong way, but what does one do with a CNC router/mill when one can't use CAD?

I can...

Nice and beefy!:triumphant:

Hi Gabi,

Ok well you could have a few issues going on here.?

The Uc300 is USB and some USB cables are better than others regards there shielding and ground. So use a good quality cable and...