Search:

Have a read of the manual for setting the pots. Plus I think there may be posts over on the Denford forum somewhere where the Denford guys give a few pointers for setting the drive.

Generally...

Have you downloaded the wiring diagrams from the Denford forum?

My guess would be one pair is a tacho feedback, and the other a thermal cutout (probably the ones that have been looped). If there's...

The manual toolchange VMCs have no pneumatics, instead you get a big lever on the side of the head for releasing the tool. I'm assuming underneath the cover, it's the same spindle/drawbar/spring...

I wouldn't swing on anything if it were my mill!

if you remove the casing/cover around the spindle you will probably see a spindle motor connected to the atc spindle via a belt - that's how...

The F means a flat on the shaft.
I sold those motors to denford when i worked at MCP, many moons ago.

That datasheet should be good enough. The main thing is once you have the machine running, make sure the steppers aren't getting too hot.
Is that a brake assembly on the end of the stepper?
...

HI,

After being looking at various controllers at the end i decided to test some of the offline ones. Started with one of the cheap ones. As you can imagine it would be great to forget about...