Search:

Hi,

I've just finished making something similar-ish - a control plate for a telecaster, but to accommodate Hofner style switches/pots etc.

Pretty straightforward process - client sent me the...

RDochert,

Welcome to the forum, have you got the plate in the pic to hand or is it off the web?

Do you think you could take a paper rubbing of the holes well enough and send it to someone...

Finally a question related to my job. As a guitar maker I would recommend that you cut that out of a piece of steel 1.5 mm should be thick enough with a fine tooth piercing saw. For a one off it is...

The main thing about the neck plate is the accuracy of the bolt holes, the outline does not have to be super accurate. So you could put the guitar on a piece of paper and mark the hole positions,...

If you had an accurate DXF (or some form of file format suitable for getting accurate dimensions from), it should be a quick job for somebody with a CNC plasma table, followed by a quick buff on a...

Perfectly sensible request to make - post it in the RFQ section with a bit of a drawing - better if you can offer a DXF file as well. You might want to specify the material otherwise you'll likely...