Search:

Well, I've finally gone and bought one. I went for the new Bambu Lab P1S with AMS in the end. Seems to have good reviews, and the X1C was considerably more expensive for what seemed like a similar...

I usually check CPC before going to Farnell. They have been part of the same group for many years and even share the same website software and many of the product lines. Bizarrely, you can often...

This company https://chaloncomponents.co.uk/product-category/cable-management/tri-rated-cable/

will even sell it by the mtr.

Use Tri rated single core flex,designed for panel wiring and available from TLC Electrical.Other distributors are available.This is what I used on my Bridgeport EZI TRAK rebuild.

Colin you have it wrong it's 24v-80Vac or 30V-110Vdc

It makes no difference which you use just make sure you leave about a 10% safety margin on the Max voltage. With large motors the more volts...

Are you sure they have the option of 24vdc and 80vac input? Those numbers don't match up.

To be honest, Colin if your converting a Bridge port then I would seriously consider Closed-Loop steppers because they will easily match the performance that Bridgeport limits you too. In my opinion,...

The BST servos are very good for the money they cost and well worth the price but don't be under any illusions that they are in the same league as Yaskawa or any of the leading brands because they...

I think they are probably used quite widely on Chinese industrial machines ie not just for export to Western hobby users.

Mine came with connectors and rather long tails with all connections...

The latter. Brian is a very helpful guy and can get you machine in tip top shape for a very very good price.

You ship the saddle knee and table to him on a pallet and he does the rest.

http://www.denfordata.com/bb/

Worth a look there.

Changing motors won't make much difference but the drives could make big difference to how smooth it runs and also less important the speed you'll get. Esp if you use digital drives which I fully...

I have a Novamill to which I have fitted new drivers but retained the original steppers and it's just fine. The machine was parted from its electronics so I had to do this. Worth trying just using...

Have a look at this http://www.oneoceankayaks.com/madvac/machine_frame.htm

30AF means its a 30A 'frame' even though it might be fitted with say a 16A breaker. A 30A breaker in a 30A frame cannot be upgraded to bigger, but thats probably not an issue here.

Brekaers come...

30Amp Fuse. :smile:

Hi Colin

That is correct 3phase 240v out.

Andy

Colin

You do not get the collets or let me say I didn't and I don't think anyone else that I know did, I purchased my collets from a Chinese supplier and they have been fine, I have done a couple...