Search:

Does it vary with speed? Steppers can emit squealing noises at different speeds (usually low speeds) and this travels down the ballscrew and can sound like it is coming from the bearings. Steppers...

I've installed quite a few of these Huanyang VFDs on different machines in my workshop and all have worked for years except one a long time ago which went bang a few seconds after the first switch...

Time to get this project started . . .


https://youtu.be/ioo_Vyz_lmk

Thanks m_c. From what I can tell they should be more than powerful enough for what I need. I've seen them used on a 150kg bridgeport knee (usually via a pulley of 3:1 or similar) so my 40kg head...

I decided to strip down the rear end of this spindle to get access to the pulley. It took longer than expected!



https://youtu.be/p8kE8pJgYn8

For reasons that will soon become apparent I was searching for a milling machine spindle and came across this interesting item. BT30-ER20 tool holder, air powered draw bar for tool changing, HTD5...

Time to fix it properly . . . well my way anyway



https://youtu.be/6ruQvzAwo4s

It's been broken for many years but it should be an easy fix . . .


https://youtu.be/zTnwpZz62FE

Thanks for all you do on this forum. Have a great Christmas and a speedy recovery!

Finally finished. We needed to strip down some of the machine to route the wiring, then it was time to upload all the information to GitHub.



https://youtu.be5aAXnm29t5g

I finally get the controller installed . . . after more tinkering!

https://youtu.be/hDzTCiMsE7Y

I've been wanting to do this project for a while. I wondered if it would be possible to build a spindle monitor to check if it has stalled out and then e-stop. Hopefully this would stop it breaking...

It's working! Had a few issues in this one, but I think we got there:

https://youtu.be/o9civYBVkXs

Thanks Lee.

Back to the OP - it was a long time ago but I think I used this VFD on my CNC machine, or something very similar.

So if you know the 2.2 kW motor specs you can set up PD003 - PD008...

OK so it is a sort of pick and place machine with no real loads at the end effector (dispenser end)? And the positioning errors there when you just jog it about with no load on the effector?

I...

XYZ axis complete!

https://youtu.be/-gradH-Hulc

Overall I’m still happy with it. It started to cut off square but this was fixed by retightening the main pivot bolt for the arm. 400 Watts is fine even on very large pieces. It has never...

X axis gantry, cheap linear rails quick look, new Z axis touch off (again!) and Y axis movement.


https://youtu.be/ZCYr-Syin5E

Thanks. To be honest making the videos helps me stay on track and finish them!

OK, I finally found a well priced and well featured plasma cutter. Here we go again on another CNC project!

https://youtu.be/GClBEL8X6mc

This is not the question you asked but for extra security (just as a general step) you can check the resistance across each winding pair before connecting to the driver. Should get a few Ohms across...

Hi,
I'm not fully committed to this, just looking into it for now, but does anyone know of a low cost plasma cutting machine suitable to use with a CNC machine. I think HF start is too risky -...

32260
32261
32262

OK flipped them around for you. Could be well off track here but a small enclosed machine for education makes me think Denford / Denford Microrouter. Maybe rebranded model by...

P1S with AMS (optional multi spool unit) plus one spool of filament was £909 delivered.
Less if you don’t get the AMS but if you buy it later it is considerably more expensive.

At the moment it...

Well, I've finally gone and bought one. I went for the new Bambu Lab P1S with AMS in the end. Seems to have good reviews, and the X1C was considerably more expensive for what seemed like a similar...