Search:

No offence taken, this was kind of what I was getting at.

Original bearings on the right are 6001Z, they do not look like angular contact bearings.

They have been replaced with skf e2.6001-2z...

Can't remember sorry, not got the microrouter anymore.

Temporary fix some digital calipers to the x and use them to calibrate movement.

Sorry to hear you have joined the club, its not a good club to be in.

http://www.mycncuk.com/threads/14563-Wood-Works-Ebay-cnc-router-review

thought id get a quick job in before the new parts arrive.

turns out the machine is just dangerous, the cable to the steppers is not sufficient and gets warm. the cable is only rated for 3amps,...

you may need a new psu to meet the spec of the new spindle

i went to southern engineering 2017 and spoke to some of the stalls selling tool holders, two did say they still had the moulds for bt35, but the demand just wasnt there

I've not seen any proper bt35 tooling (da180 da200) on ebay for years.

Last time I saw some I managed to get 9x da200 holders for £15 each

Correct two, I'll post a load of photos at some point over the weekend from when I did the bearings

24550

Got some tapmatic tapping heads for my triac, work a treat

http://www.mycncuk.com/threads/9843-Denford-Microrouter-V4

I wouldn't swing on anything if it were my mill!

if you remove the casing/cover around the spindle you will probably see a spindle motor connected to the atc spindle via a belt - that's how...

You do not need a new sprint card, ignore that advice. You just need to use a v4 or v5 board, they work perfectly

Ready for painting

http://i187.photobucket.com/albums/x202/magicmushrooms1/cnc/DSC_2169_zpseinynyly.jpg

Will drop the current one step

First bit if work completed


http://i187.photobucket.com/albums/x202/magicmushrooms1/cnc/DSC_2163_zpstgwvafn4.jpg

...

restarted mach and they are now working.

the machine is working, still need a smooth a few things out but its working
...

well that's me £450 lighter...

Ethernet smoothstepper

http://www.amadeal.co.uk/acatalog/SmoothStepper-Ethernet-794.html

3x drivers
...

trouble with starmill and novamill is the way the spindle motor is integrated into the head.

unless you get a replacement motor of exactly the same size you will lose z travel.

although a small...

Those are the ones, I can do you a vid over the weekend if you want.

Can't remember what size but they do one thats a perfect fit length wise.

As for power it's plenty of power for me, removes...