Selection of suitable milling machine for CNC conversion

[Cube3]

Hi Ian,
I am currently converting a Warco GH universal. I have it all in CAD and would be happy to explain how and what I have done so far.
Regards Simon

Sent from my SM-G925F using Tapatalk

[IanT]

I have never looked properly at the Warco range.
The GH universal is too big for the space I have available, but the WM16 and 18 may be an option.
I think Warco exhibit at the Midlands Model Engineer Exhibition. I will go and have a look at their lathes then.

Thanks Simon for the offer. I will remember that when nearer the time to start. It could be very helpful.

[terry1956]

Hi Ian,
I am currently converting a Warco GH universal. I have it all in CAD and would be happy to explain how and what I have done so far.
Regards Simon

Sent from my SM-G925F using Tapatalk

. Hi, I am thinking of converting a warco super major, and would be interested in knowing your plans for your conversion. My mill as power on the z axis and x axis, and wonder if I can keep these lead screws in the conversion. Would be glad to hear your views on this. Michael