Supplied size accuracy on tooling plate.....

[Voicecoil]

I too will be ordering slightly oversize and trimming down - but I wanted to minimise the amount of trimming needed, as I'm going to have to call in a favour from a friend to do it. And in the past I've had some pretty randomly sized bits of metal from other vendors.

[Chaz]

I too will be ordering slightly oversize and trimming down - but I wanted to minimise the amount of trimming needed, as I'm going to have to call in a favour from a friend to do it. And in the past I've had some pretty randomly sized bits of metal from other vendors.

You wont have that problem here .....

If you order 102mm to get down to 100mm, it will be around 102mm.