Puruvesi MyCNC-ET7 Controller first look.

[Doddy]

Re. your first grumble - (terminal blocks) it's a big grumble if you need to meter the signals - not entirely unrealistic when debugging the machine wiring.

[JAZZCNC]

Re. your first grumble - (terminal blocks) it's a big grumble if you need to meter the signals - not entirely unrealistic when debugging the machine wiring.

Get what you are saying but if anything they make that easier because the wires are facing straight up and easily accessible(which could be another grumble because I'd like them to come out sideways for entering the trunking..Lol). I would never meter of terminal screws anyway.